Why Choose Pre-Assembled Commercial Steel Fence Panels

Commercial Steel Fence Panels
Commercial fencing systems last longer and look better if they’re welded in the factory and are protected by tough, corrosion-resistant coatings.

A few years back, I took some extra work on a friend’s building crew. Their bread and butter work was putting up and welding together steel fencing for everything from restaurants and breweries to lumber yards and building material depots. I’ve seen projects that required lots of onsite welding and those that didn’t require any or very little. With very few exceptions, those in the latter category seem to be longer lasting and more beautiful than those in the former category.

Commercial fencing needs to be strong enough to provide adequate security and preferably attractive to look at, and rust is one thing that can get in the way of both goals. Rust is often the result of bad onsite weld jobs, but commercial steel fence panels that hook into place, as opposed to panels that need to be welded together, push down the project’s bottom line, and when well designed are able to provide strength comparable to a weld. If a pre-welded fencing system is on your horizon, there a few things to look for that tend to produce the easiest install and the best long-term results.

What to Look for in Commercial Steel Fence Panels

Anything that saves significant on-site assembly time is a huge boon to everyone involved. Welding on site sucks up a great deal of time, and, while popular with the welder, isn’t as friendly to the overall construction budget. I’ve been on some sites in which a team would get a section of the fence up, then those workers would have very little to do while the welders worked. I’ve also seen on-site welding result in the welders becoming pressured and not making the highest quality welds. That is an unfortunate result, as a bad weld is one of the first places where corrosion occurs on a steel fence. The qualities I look for in a commercial fence system are:

  • Pre-Assembled Panels: Though not always the case, panels that have been assembled in the controlled conditions of the factory typically have better welds. Any extra upfront cost of a pre-assembled panel is nearly always recouped by the decrease in labor expense, in my experience.
  • Bracket Installation: Connecting the panels via brackets is a walk in the park when compared to welding the panels together. Some fencing systems that use brackets also provide pre-drilled holes and protective coverings for the bolts. This ensures that corrosion is kept at bay at these more vulnerable joins.
  • Rackability: If the fence is meant to cover a change in grade, it either has to be stepped or “racked” along the contour. A rackable fencing system is very convenient to install, as it cuts down on the excavation time, labor, and added materials involved in building a retaining wall, making building security fence on hills simple and fast. One concern folks might have with rackable systems is that their coatings will be compromised. This is a reasonable concern, and it is partly why it’s important to invest in a system with the best coating available.

Durability after the Install

Durability is a pretty important consideration no matter what kind of fencing is being used. I’ve already briefly mentioned the rust problems that I’ve seen develop along bad welds. Most fences are particularly vulnerable at the weld and generally vulnerable wherever there is some kind of joint. Moisture penetration and the rust that ensues are the primary cause of deterioration in otherwise sturdy steel fences. Here’s what it takes to really keep rust at bay.

  • More Than One Coating: One system I’ve used combines a Zirconium Oxide pretreatment with an epoxy powder base and powder coating. These sorts of protections are built for the long haul, and they’re not the norm. A lot of fencing systems, even industrial ones, attempt to get away with the minimum amount of protection, and the owner generally pays for it in the long run.
  • Smooth Surface for Better Coating Adhesion: Not all steel is forged to the same tolerance. Some steel possesses a more porous surface, while other steel has been engineered to a higher tolerance, and provides a smooth surface at the micro-level. Does this really make a difference? In terms of long-term weather protection, it does. The less porous a steel bar is, the easier it is to protect with whatever coatings are applied to it, as there are fewer micro-pores that could lead to rust outbreaks if not fully covered by the coatings.
  • High-Quality Galvanized Steel: Having a thicker layer of zinc on the steel gives it a longer life of useful service. Galvanized steel is often accompanied by the letter G and a number such as 40. This is a simple reference to the thickness of the zinc layer on the steel. The higher the number, the thicker the protective zinc layer is. In an industrial or commercial setting, investing in a fence that uses G90 rated galvanized steel is going the extra mile, and will provide excellent durability and longevity, making it a great fence for a wet area or coastal location.

I’ve been on lots of job sites where time and money were wasted doing a ‘quick and dirty’ on-site fence welding job, and in my experience, pre-assembled, pre-welded panels connected with brackets are a much better choice. When you use a high-quality manufacturer, you get welds of much better quality as well as premium coatings and high-quality steel for a long, low maintenance lifetime for the fence.

Some of the best fence systems of this kind are produced by the Fortress Fence company. For locations that require something very heavy duty, their Titan line of industrial fencing has benefits that are fairly rare in the industry, creating an ideal combination of good looks and fundamental strength. In addition to good fencing, they also produce a wide range of innovative building materials, so if you’re in need of commercial railing or ornamental hardware as well as fencing, take a look at their larger catalog of products.